Sensoneo provides smart waste monitoring sensors and collection optimization software.
Sensoneo Ultrasonic Bin Sensors are battery-powered devices that measure fill levels in waste bins, dumpsters, and containers using ultrasonic beams. The sensors connect to LoRaWAN, Sigfox, NB-IoT, CAT-M1, or GPRS networks and send fill-level data in real time to Sensoneo's Waste Management System for route planning and reporting. A built-in accelerometer with tilt recognition detects bin pickups and sends service verification notifications to the dashboard. The units are housed in IP67 or IP69 rated, recyclable glass fiber reinforced polyamide casings, with some models adding GPS and firmware-over-the-air updates.
The Twin Fill is a smart bin with two waste flows. This makes recycling a piece of cake. With the text and colour on the covers, the two waste flows are immediately clear. The smart bin has bag holders that are connected with a hinge to the exterior. This makes removing the bin liner an effortless task. The Twin Fill can be upgraded with the Sensor Fill so that the waste bin communicates with our ‘Smart Waste Manager’ platform. The Quattro Fill is supplied with one opening by default, but can be upgraded with three additional openings that can come in very handy in busy places. The Quattro Fill is equipped with a standard 120L wheelie bin. The wheelie bin can be emptied using a bin liner and/or a waste collection vehicle. The Quattro Fill can also be fitted with a stainless-steel cigarette compartment and is designed for use with Sensor Fill. This way the smart waste bin communicates with our ‘Smart Waste Manager’ platform. The Easy Fill is a smart bin that was developed for the outdoors and has a container volume of 115L. The standard Easy Fill is manufactured with a stainless steel cover that is easy to open from the top. With this cover, the waste remains in the bin and prevents litter from ending up on the street. The Easy Fill can be delivered with 1 or 2 openings. The Easy Fill is fully manufactured with 2 mm high-quality material and is also provided with a high-quality powder coating. The Easy Fill is prepared for the Sensor Fill. The Refund Fill waste bin is designed to deposit cans and bottles and receive a refund in return. Each deposit triggers the user’s refund application and scans the product’s barcode, after which the data is recorded. The CPU in the waste bin shares all data with our Smart Waste Manager platform. When the smart waste bin is full, the collected waste is processed for a second life! Additionally, the platform can be connected to any refund application to enable refunds for the users. This will encourage people to use the Refund Fill and make an environmentally conscious contribution.
BrighterBins ToF Sensor BrighterBinsBrighterBins ToF Fill Level Sensor is a time-of-flight sensor that measures waste bin fill levels for smart waste management fleets. It connects via LoRaWAN, Sigfox, NB-IoT, LTE-M, or BLE networks and transmits fill-level data to waste route software for collection planning. The device runs on battery power for up to ten years, carries an IP68 rating for durability in outdoor bin environments, and provides sub-0.5 cm measurement accuracy through time-of-flight ranging.
Sensor UG-03 EvrekaEvreka Fill Level Sensor is a wireless sensor, model UG-03, that monitors fullness level, temperature, movement and location of waste containers in real time. A long-range ultrasonic transducer measures fill level while temperature and motion data help detect incidents such as fire or sudden container movement, with readings sent over GSM, LoRa or NB-IoT networks to the Evreka cloud platform. Users set alarms on the web-based platform and receive SMS and email notifications, with remote configuration and software updates supported after installation.
Connecting the worlds most innovative cities to the latests smart technology solutions.
Find out More